Page Comparison

...

Upgrading from Previous Versions

Since the Classroom Capture program has been redesigned for 5.4, be advised of the following points regarding upgrading to the new Classroom Capture:

...

Notification of this and future upgrades will appear as a notice in the bottom bar of the Classroom Capture window. Clicking on this notice launches the upgrade.

If you are upgrading from Classroom Capture version 5.3 or earlier, be sure to check the following items after installation and perform actions as necessary:

1. Check to be sure the Classroom Capture device is still registered (using the MAC address of the device). If it is not, register it (instructions below).
2. Assign the device to a room, and re-license if necessary. These assignments should have been retained on upgrade, but check to be sure.
3. Configure the devices for capture, if necessary.

Download the Installer

Download the Classroom Capture (Windows) installer from the EchoSystem Server (ESS). A wizard guides you through installation.

...

1. Log into the PC as an Administrator.
2. Locate the installer executable and double-click it. This starts the installation process.
3. If you are upgrading from a previous version of Classroom Capture, you will receive a confirmation dialog box, shown below, requesting to uninstall the old version. Click yes to allow the wizard to uninstall the old version and continue with 5.4 the current installation.
   
4. Follow the installation wizard.
5. Confirm or change the locations for installation and for capture files, as shown in the below figure, then click Next.
   
6. Continue through the installation wizard. You will receive a dialog box, shown below, providing start/stop instructions for Classroom Capture. The program is automatically configured to start when Windows starts.
   
7. Click OK. You then receive a dialog box, shown below, providing the MAC address of the computer. You will need to know the MAC address in order to register the device on the ESS.
   
8. Continue through the installation wizard. When complete, click Finish to close the installer.

...