...
- EchoSystem Capture Appliance
- EchoSystem SafeCapture HD
- Echo360 PRO
- Classroom Capture Software
...
This page describes how to configure the system-wide device defaults and the device-specific device configurations, which control the capture capabilities of devices. The decisions you make on these topics will affect the products you can produce and, therefore, the the /wiki/spaces/54/pages/590217277 you you select.
High-Level Procedure
Note |
---|
Computers running Personal Capture are managed differently from all other devices. See /wiki/spaces/54/pages/590217403 Personal Capture Guides for details. Devices used to capture input for Classroom Capture are referred to as "sources" to differentiate them from the "Classroom Capture device" which is the installation registered to the ESS. See /wiki/spaces/54/pages/590217393 Classroom Capture Software for details. |
Follow this procedure to manage devices:
- Review and edit the /wiki/spaces/54/pages/590217481the system-wide device defaults. Defaults are inherited by every device of that type.
- Review /wiki/spaces/54/pages/590217480Review device configurations. Add or edit device configurations as necessary.
Add /wiki/spaces/54/pages/590217483 as Add individual devices as necessary. You will need to add a device manually manually only if if your network does not use DHCP.
Tip title Best Practice: Use DHCP Dynamic Host Configuration Protocol (DHCP) is a network protocol that allows a server to automatically assign an IP address to a device. The alternative is to manually assign a static IP address. This process is slower and more error prone. Echo360 strongly recommends using DHCP.
- /wiki/spaces/54/pages/590217484Edit individual device configurations. You may need to tweak the configurations for the venue.
...