In this section: |
This process assumes you have already installed the Echo360 PRO (PRO).
Configuring the PRO consists of these phases:
After configuring the PRO, you may want to further configure the EchoSystem Server (ESS), as described in Next Steps below.
{multi-excerpt-include:pageTitle=Include Library|name=Capture Appliance Names|nopanel=true} |
Initialize the PRO by applying a configuration file. Download the configuration file from the ESS web interface and apply it to the device using a USB drive. The same configuration file can be used to configure all capture appliances.
Verify that the settings on this page are correct.
Under the Front Panel Menu section, there is an option to either show or hide the Administration Menu on the Front Panel Display of the PRO. If checked, this will allow any user to access the Administration Menu via the Front Panel of the device and intentionally or unintentionally change any of the settings found in this menu. Please see the Administration Menu section for more details on these settings. Please also keep in mind that the selection on the Device Defaults page will affect all PRO devices. This option can also be managed on an individual device basis by Editing the Device. |
Remove the USB drive from your computer.
The configuration file you downloaded from the ESS is a digitally signed file. The PRO does not accept files that do not bear the digital signature of the ESS. Do not modify this file. |
Do this for each capture appliance.
Do not insert the USB drive until instructed. |
Once the device has been configured it can be reset if needed, through the Administration Menu on the Front Panel Display as well as manually. |
Connect the desired input devices/sources to the PRO. For more information on device specifications and supported input sources, see Supported Standards for the Echo360 PRO and Echo360 PRO Product Specifications.
The Echo360 PRO begins communicating with the ESS immediately after installation.
The PRO is a managed device in ESS. Managed devices must be registered to be configured for use with the ESS.
The steps in this section are not part of PRO configuration. However, in order to check the operation of the PRO, you will have to:
If you have already added the room in the ESS and licensed it, you can skip to the last step, assigning the PRO to the room.
To ensure that the audio-visual devices are connected properly and feeding into the PRO, log into it and look at the monitoring screen.
Currently, the PRO is not enabled by default for use with any Product Groups. In order to resolve this, please Edit a Product Group you would like to use to utilize the PRO (click the checkbox next to PRO).
The PRO is ready to capture presentations.
If this is a new installation, you will probably want to configure your EchoSystem further. Follow these steps: