Echo360 PRO Product Specifications
In this section:
Click to enlarge image
Click to enlarge image
Deployment Options
Mount in a standard 19" A/V rack
Set on a tabletop or shelf
The allowable operating temperature of the Echo360 PRO device is between 0° – 50° C (32° – 122° F). Be sure to install the device in a location where the temperature around the unit does not exceed this limit. If operated in an environment where temperatures exceed this limit, the unit may overheat and malfunction permanently.
Software Required
EchoSystem (ESS) 5.5 Service Pack 1 or higher
Display
Capture full-motion output from any Composite, VGA, HDMI or 3G-SDI enabled device, including document cameras, electronic whiteboards, and computers.
Full-motion encoding records applications, annotations, embedded video, and animations.
Capture input resolutions from 640×480 to 1920×1200.
High-performance encoding engine provides H.264 encoded output at 30fps at all resolutions and bitrates from 240kbps to 3.2Mbps.
All input aspect ratios supported.
Appliance Display Resolutions
You can download a (76 KB) with all of the specific resolutions.
DMT: Display Monitor Timing lists standard display timings for various resolutions and screen sizes
GTF: Generalized Timing Formula is a video timings standard
CVT: Coordinated Video Timings (CVT) is a replacement for GTF
CVTRB: Video Timings-Reduced Blanking is a VESA standard which offers reduced horizontal and vertical blanking for non-CRT based displays
Video
Fullscreen (4:3) standard definition input resolutions from QCIF to D1.
Widescreen (16:9) high definition input resolutions from 480p to HD-1080p.
Provides H.264-encoded output with configurable frame rates including 12.5/14.985fps or 25/29.97fps at bitrates from 120kbps to 3.2Mbps.
Audio
Audio encoding in stereo, mixed-mono or mono.
Audio capture in AAC, sampled at 22.05kHz or 44.1kHz, encoded at bitrates from 32kbps to 128kbps CBR.
Options for pro-level (+4dBu/1.228Vrms/1.737Vpk) or consumer-level (-10dBv/0.316Vrms/0.447Vpk) signals.
Professional line-level audio input with bare wire termination for direct wiring of stereo balanced (non-powered) or unbalanced audio.
Consumer line-level audio input with a stereo RCA connector.
HDMI Audio
We currently support two channel PCM encoded audio over HDMI, however, high data rate encoded audio (like Dolby 5.1) is not supported.
Also, HDMI audio can only be utilized when also capturing HDMI video. For example, if you have an HDMI input and a VGA input connected on Channel 1, you could not use VGA for video and HDMI for audio.
One final note on HDMI audio is that it is always mixed with the analog source. If you want to use HDMI audio you must also use the balanced or unbalanced audio input. The device can mix from one to three sources of analog (balanced/unbalanced), HDMI 1 and HDMI 2.
Package Options
These packaging options produce viewable media for students:
Podcast. MP3 audio
Vodcast. M4V audio and motion display
Audio Rich Media. Flash-based audio and display (browser)
EchoPlayer. Flash-based audio, video and display (browser)
Signal Processing and Encoding
Signal pre-processing includes decimation, automatic de-interlacing, and noise reduction.
General
Dimensions: 431mm wide x 317mm deep x 44mm/1RU tall (without mounting options)
Weight: ~11.8lbs / 5.4kgs
Internal temperature sensors with temperature-dependent, variable speed, forced-air cooling
World-compatible direct AC connection; input voltage: 90-240vAC 50/60Hz, using an IEC320-C13 cable
Operating environment: 0°-50°C (32°-122°F) ambient temperature
Operating humidity: 25% to 80%, non-condensing
Power requirements: 100vAC to 240vAC, 50/60Hz
Power consumption & heat: 62 watts (212 BTU/hr) max, 50 watts (171 BTU/hr) during capture
Agency Certifications
UL 60065, 7th Edition, 2006-11-20
FCC CFR47 Parts 15:107/15:109