...
Completed | Item | Description |
|---|---|---|
Download the Media Processor installer | Log in to the ESS interface and click the Downloads tab. On the Software Installer Downloads page, download the Media Processor. The media processor is supported on Windows and Linux platforms. | |
Install the Media Processor | ||
Register the Media Processor |
Capture Infrastructure
Install and Register
...
Classroom Devices
Completed | Item | Description |
|---|---|---|
Physically install the capture appliance or Download the Classroom Capture software. | Rack or mount the capture appliance in the desired location. Plug in cables as explained on the following pages as it applies to the appliance(s) you are using: | |
Initialize the capture appliance (USB) | Initialize the capture appliance. Use the instructions located on the following pages as applies to the appliance(s) you are using: | |
Register the capture appliance | Register the capture appliance. See /wiki/spaces/54/pages/590217367. |
Install and Register Software Capture for the Classroom
Completed | Item | Description |
|---|---|---|
Download the Software Capture installer
Log in to the ESS interface and click the Downloads tab. On the Software Installer Downloads page, download the Software Classroom Capture installer. Software Capture is supported on Windows 7 and Windows 8. | ||
Install Classroom Capture software | See /wiki/spaces/54/pages/590217388. If you are upgrading from a previous version, you will need to uninstall the existing Classroom Capture software and reinstall Software Capture in Classroom Capture mode. | |
Video source connected to the podium PC (Required only if capturing video) | If the captures from the installation are to include video, install and configure the USB camera on the podium PC. See /wiki/spaces/54/pages/590217394 for instructions and /wiki/spaces/54/pages/590217389 for a list of supported cameras. If you did not perform this step as a /wiki/spaces/54/pages/590217465 item prior to installing Classroom Capture, you should perform it prior to registering the software. | |
| Video signal checked and adjusted (Required only if capturing video) | Use the camera's vendor software to adjust the camera settings (such as aperture or resolution quality). Classroom capture will respect these settings. | |
Register the Classroom Capture software devices | ||
Initialize the capture appliance (USB). | Initialize the capture appliance. Use the instructions located on the following pages as applies to the appliance(s) you are using: | |
Register the classroom device. | Register the capture appliance. See Register the Capture Appliances and Register Classroom Capture. |
Install Personal Capture
...