Versions Compared

Old Version 41

changes.mady.by.user Hannah Petty

Saved on

compared with

New Version 42

changes.mady.by.user Hannah Petty

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Panel

In this section:

Table of Contents
maxLevel3
minLevel2

...

ButtonDescription
Up - Can be used to move up through the menu options as well as to move forward through a configurable field.  Also used to scroll through alphanumeric input options (press enter to select the letter or number you'd like to alter and then use the up and down buttons to scroll through selection options, then press enter again to confirm your selection).
Down - Can be used to move down through the menu options as well as to move backward through a configurable field.  Also used to scroll through alphanumeric input options (press enter to select the letter or number you'd like to alter and then use the up and down buttons to scroll through selection options, then press enter again to confirm your selection).
Enter - Used for selection and confirmation.
Back - Used to return to the previous screen/menu.
Home - Press at any time to return to the Home Menu.

Record/Pause - Used for capture control.

When the Record button is pressed on the front of the appliance to start an ad hoc capture, the appliance uses the product group that is set in the ESS and designated as the "One-Touch Product Group". For more information, please see One-Touch Product Group configuration and "What is the One-Touch Profile" in our FAQs section.

LED Behavior: This button is backlit by an LED that behaves differently based on the current Recording State

    • Idle: Solid White
    • Recording: Solid Red
    • Paused: Flashing between Red and Off
    • Prerolling and initializing: Flashing between Red and White
    • Stopping: Solid White

Stop - Used for capture control.

LED Behavior: This button is backlit by an LED that behaves differently based on the current Recording State

    • Idle: Solid White
    • Recording: Solid Blue
    • Paused: Solid Blue
    • Prerolling and Initializing: Solid Blue
    • Stopping: Flashing between Blue and Off

...

#SectionDescription
1Date and Time

The current local time of the device, in HH:MM:SS AM/PM  (i.e. 10:00:40 AM)

2Recording State
  • Idle:  Default state of the device when no capture task or publishing task is occurring.  When the device is in this state, any action can be performed.
  • Recording (with Timer):
    • For Ad Hoc Captures:
      • Displays the "Time Remaining" based on the default ad hoc capture length of 2 hours.
    • For Scheduled Captures:
      • Displays the "Time Remaining", which counts the timer down from the length of the scheduled capture.
      • Displays an option to Extend Recording by 5-minute increments (up to 1 hour). This will require confirmation by the user.
  • Paused: Displayed while the capture is paused.
  • Stopping (with Timer): Displays the "Time Remaining", which counts down while the device is finalizing the capture.
  • Pre-Rolling: 
    • For Ad Hoc Captures:
      • Displays for a brief period while the device is in communication with the ESS prior to the start of the capture.
    • For Scheduled Captures:
      • Displays for 5 minutes prior to the start of the capture which allows the user to start the capture early. This will require confirmation by the user.
  • Initializing: This state will appear while a Device Configuration file is being applied to the device. This status also appears briefly after initiating an ad hoc capture but before the pre-rolling status.
3Status bar
  • Recording Icon: Shows an icon representing the current Recording State. 
    • Paused/Pre-Rolling:  
    • Recording:  
    • Idle/Stopping:
  • ESS Connectivity Icon: Shows whether or not the device is currently connected to an ESS. 
    • Connected:  
    • Disconnected:
  • The status bar will display an icon when the headphone jack is in use
  • The status bar will display an icon when in recovery mode, for more information please see our FAQs section.
  • The status bar will display an animated icon while the device is uploading a capture.
  • Device message codes: E1 through E12, for more information please see the Device Messages section below.
4Capture Actions and Info.This will show any pertinent actions that can be taken by a user depending on the current Recording State. When Idle, this will show the next upcoming capture (if applicable). When Recording, this will show actions that can be taken.
5Channel 1 connectionWhat input the Channel 1 input is configured to use for the current or next scheduled capture. If the device is Idle and there are no upcoming scheduled captures, this section will display the word, "None".
6Audio connectionWhat input the Audio input is configured to use for the current or next scheduled capture. If the device is Idle and there are no upcoming scheduled captures, this section will display the word, "None".
7Channel 2 connectionWhat input the Channel 2 input is configured to use for the current or next scheduled capture. If the device is Idle and there are no upcoming scheduled captures, this section will display the word, "None".

...

Sub MenuDescriptionSelectable / Read-OnlyOptions
Load Device XMLInitiates appliance to read device.xml via USB port. Provides real-time status on the reading/loading of the device.xml file.SelectableOK, Cancel
Manage NetworkAbility to enter/set some of the information from the Network Menu.SelectableSee Manage Network section below.
Save Diagnostics ReportAbility to download the device log to USB.SelectableOK, Cancel
Monitor AudioAllows selection of the desired audio input type for the audio source as well as the volume.SelectableSelect inputs, Adjust balanced and unbalanced volume, Cancel options.
PingAbility to ping the localhost, the gateway or a custom IP address.SelectableAlpha-numeric input and Ping, Cancel options.
Note: Upon Ping, response will either be Connection Successful or Connection Failed
NS LookupAbility to obtain domain name or IP address mapping, or for any other specific DNS record.SelectableAlpha-numeric input and nslookup, Cancel options.
TracerouteEnables the ability to run the traceroute command.SelectableAlpha-numeric input for traceroute address, Cancel options.
Recover DataAbility to bulk recover all captures from the SSD to USB media (USB flash drive or mass storage device)SelectableStart Recovery, Cancel options. For more information, please see "Recover captures from SSD" in our How-to section.
Restart DeviceEnables the ability to restart (soft reset) the device.SelectableOK, Cancel
Factory Reset DeviceHard reset of the device.Selectable

Save Settings, Delete Settings, Cancel options.

'Save Settings' will retain any settings that had been applied with a device.xml file prior to doing the reset.

'Delete Settings' will remove an applied device.xml file during the reset.

Anchor
Manage Network
Manage Network

...