SafeCapture HD Push Button Factory Reset

Owned by Hannah Petty
Last updated: Aug 17, 2015
1 min read

Overview

It is possible to perform a factory reset on SafeCapture HD devices via the reset button on the back of the device.  Note that the reset process can take up to 10 minutes. Ensure that the unit does not lose power or is restarted during this window. As with all factory resets, any existing captures on the unit will be lost as a part of the process.

Activating the Push Button Factory Reset

To activate the reset, the reset button must be pressed while powering on the device.  A reset by itself is not sufficient.

The process:

  1.  While the SafeCapture HD is powered off, press and hold the reset button

  2.  While still holding the button, power on the SafeCapture HD

  3.  Release the button after 10 seconds